View our latest posts below:
-
Offsets vs Factory Trailing Arms
65-82 Corvette rear trailing arms and how offset t-arms work. Our standard offsets and coilover t-arms offer 2″ of additional backspacing for aftermarket wheels. By moving the parking brake bracket to the top of the arm we gain one Inch, then we offset the entire t-arm between the pivot mount and the bearing mounting surface…
-
84-87 Corvette Front Coilovers
Parts List: • (2) assembled shocks with upper clevis• (2) lower shock mount plates• (2) end link kits (depending on kit purchased)• (4) M8-1.25 x 30mm bolts w/flange head pinch nuts• (4) M8-1.25 x 50mm bolts w/flange head pinch nuts (most will only use two)• Pair of spanner wrenches First, remove the front composite spring.…
-
HSHP-25K – 30 spline inner axle kit
Parts List: • (2) 30 spline inner axles• (2) 12 bolt c-clips• (2) 10 vette thrust washer• 30 spline spider gears• (2) half shaft flanges Once the differential is out of the car, you must pull the posi unit and completely disassemble it. The posi unit needs to be machined for the new larger side…